Regional source identification using Lagrangian stochastic particle dispersion and HYSPLIT backward-trajectory models

The main objective of this study was to investigate the capabilities of the receptor-oriented inverse mode Lagrangian Stochastic Particle Dispersion Model (LSPDM) with the 12-km resolution Mesoscale Model 5 (MM5) wind field input for the assessment of source identification from seven regions impacting two receptors located in the eastern United States. The LSPDM analysis was compared with a standard version of the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) single-particle backward-trajectory analysis using inputs from MM5 and the Eta Data Assimilation System (EDAS) with horizontal grid resolutions of 12 and 80 km, respectively. The analysis included four 7-day summertime events in 2002; residence times in the modeling domain were computed from the inverse LSPDM runs and HYPSLIT-simulated backward trajectories started from receptor-source heights of 100, 500, 1000, 1500, and 3000 m. Statistics were derived using normalized values of LSPDM- and HYSPLIT-predicted residence times versus Community Multiscale Air Quality model-predicted sulfate concentrations used as baseline information. From 40 cases considered, the LSPDM identified first- and second-ranked emission region influences in 37 cases, whereas HYSPLIT-MM5 (HYSPLIT-EDAS) identified the sources in 21 (16) cases. The LSPDM produced a higher overall correlation coefficient (0.89) compared with HYSPLIT (0.55-0.62). The improvement of using the LSPDM is also seen in the overall normalized root mean square error values of 0.17 for LSPDM compared with 0.30-0.32 for HYSPLIT. The HYSPLIT backward trajectories generally tend to underestimate near-receptor sources because of a lack of stochastic dispersion of the backward trajectories and to overestimate distant sources because of a lack of treatment of dispersion. Additionally, the HYSPLIT backward trajectories showed a lack of consistency in the results obtained from different single vertical levels for starting the backward trajectories. To alleviate problems due to selection of a backward-trajectory starting level within a large complex set of 3-dimensional winds, turbulence, and dispersion, results were averaged from all heights, which yielded uniform improvement against all individual cases.     

Cadmium and copper toxicity in three marine macroalgae: evaluation of the biochemical responses and DNA damage

Marine macroalgae have evolved a different mechanism to maintain physiological concentrations of essential metal ions and non-essential metals. The objective of the present work was to evaluate the antioxidant response and DNA damage of copper and cadmium ions in three halophytes, namely, Acanthophora spicifera, Chaetomorpha antennina, and Ulva reticulata. Accumulation of copper was significantly higher (P?P?U. reticulata > A. spicifera > C. antennina. DNA damage index analysis supported that copper was significantly (P?相似文献   

Persistent organic pollutants in breast milk of mothers residing around an open dumping site in Kolkata,India: Specific dioxin-like PCB levels and fish as a potential source

Concentrations of persistent organic pollutants (POPs) such as polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and organochlorine pesticides were measured in human breast milk collected from mothers residing near an open dumping site and a reference site in Kolkata, India during 2004–2005. POPs were detected in all the human milk samples analyzed, suggesting that residents of Kolkata are widely exposed to these contaminants. Concentrations of dioxin-like PCBs in the samples from the dumping site were significantly higher than in the reference site samples, whereas no such difference was found for PCDDs and PCDFs. In addition, significantly higher concentrations of total PCBs were also observed in the samples from the dumping site than the reference site. Interestingly, concentrations of total and dioxin-like PCBs in the breast milk of mothers from the dumping site significantly increased with the number of years of residence near the dumping site. These results indicate that significant pollution sources of PCBs are present in the dumping site of Kolkata and the residents living around are exposed to relatively higher levels of PCBs. When the residue levels of dioxins and related compounds in fish collected from ponds near the Kolkata dumping site and the reference site were measured, it was found that dioxin-like PCB and TEQ levels in fish from the dumping site were notably higher than those from the reference site. This result indicates that fish is a potential source of PCBs for residents living near the Kolkata dumping site.     

Surveying macro-invertebrate diversity in the Tons river,Doon Valley,India

A survey of macro-invertebrates and their monthly variations occupying the Tons river in Doon Valley was conducted from August 2003–July 2004. Macro-invertebrate collections and water samples were taken from three sampling stations every month during the period of study. All the hydrological attributes were measured monthly for 1 year. The present study showed that the water velocity, hydromedian depth, turbidity and dissolved oxygen and nature and size of the bottom substrates do play a major role in determining the macro-invertebrate diversity of Tons river. The ecological relevance of the measured hydrological attributes was investigated by comparing their degree of correlation with invertebrate density and diversity. The Shannon–Wiener index (H′) of macro-invertebrates was found to be highest (3.60) during spring season (February and March) and lowest (2.59) during monsoon season (July and August). The high values of diversity index of macro-invertebrates at all the three sampling sites indicate diverse macro-invertebrate communities in the Tons river in Doon Valley, India.     

Identification of Residues of Sulfosulfuron and its Metabolites in Subsoil-dissipation Kinetics and Factors Influencing the Stability and Degradation of Residues from Topsoil to Subsoil Under Predominant Cropping Conditions

Long term stability of sulfosulfuron was investigated in subsoil under the natural wheat cropping conditions. Experiments were conducted by applying a commercial formulation of sulfosulfuron on soil at 50 g/ha and 100 g/ha. To understand the factors influencing the persistence of residues two different experiments were conducted. In one experiment wheat crop was cultivated once at the beginning of the two years study period and subsequently the plots were kept undisturbed for the remaining period. In another experiment cultivation of subsequent crops were continued during the study period. In both the cases sulfosulfuron was applied only once at the beginning of the study. Representative soil samples were collected from the depths viz., 0–5, 15, 30, 45, 60 and 90 cm on different pre determined sampling occasions 50, 100, 200, 300, 400, 500 and 600 days after the application of the herbicide. The collected soil samples were analyzed for the residues of sulfosulfuron. Under the influence of continuous cropping conditions residues of sulfosulfuron were found to be relatively low when compared with the soil samples collected from the agriculture plots maintained without any cultivation. The residues detected are in the range 0.001 to 0.017 μg/g. Samples collected from the depth, at 30 to 45 cm showed higher residual concentrations. Soil samples were also showed the presence of break down products. The data has been confirmed by LC–MS/MS. The relation between residue content of sulfosulfuron and the factors contributing the stability of herbicide concentration were also studied.     

Understanding the multifunctionality in Cu-doped BiVO4 semiconductor photocatalyst

A visible light-induced, Cu-doped BiVO_4 photocatalyst was synthesized by a microwave hydrothermal method. The photocatalytic efficiency was investigated in the degradation of model water pollutants like Methylene Blue(dye) and ibuprofen(pharmaceuticals), as well as the inactivation of Escherichia coli(bacteria). The Cu-doped BiVO4 samples showed better efficiency than undoped BiVO_4, and the 1 wt.% Cu-doped BiVO_4 sample showed the best efficiency. The degradation of Methylene Blue reached 95%, while the degradation of ibuprofen reached 75%, and the inactivation of E. coli reached 85% in irradiation with visible light. The appearance of additional absorption band shoulders and widening of the optical absorption in the visible range makes the prepared powder an efficient visible light-driven photocatalyst. Moreover, the formation of an in-gap energy state just above the valance band as determined by density functional theory(DFT) first principle calculation, facilitates the wider optical absorption range of the doped system. Similarly, this in-gap energy state also acts as an electron trap, which is favorable for the efficient separation and photoexcited charge carriers' transfer process. The formation of oxygen vacancies due to doping also improved the separation of the charge carrier, which promoted the trapping of electrons and inhibited electron hole recombination, thus increasing the photocatalytic activity. No decrease in the efficiency of the 1 wt.% Cu-doped BiVO_4 photocatalyst in the degradation of ibuprofen over three consecutive cycles revealed the stability of the photocatalyst towards photocorrosion. These findings highlight the multifunctional applications of Cu-doped BiVO_4 in wastewater containing multiple pollutants.     

Methane emissions from a coastal lagoon: Vembanad Lake,West Coast,India

An attempt has been made to estimate methane fluxes from a tropical coastal wetland the Vembanad Lake, a lagoon along the West Coast of India. It has been found that Vembanad Lake contributes significant amount of methane to the atmosphere. Average emissions varied spatially within the lake. Methane emissions were 193.2 +/- 24.5 mg m(-2) h(-1) at Kumaragam (fresh water) as compared to 9.3 +/- 9.6 mgm(-2) h(-1) at Pullot (brackish water) site. Seasonal variation was significant between pre- and post-monsoons. Soil temperature, time of the day, salinity sediment organic carbon, all control the rate of methane emissions from the Vembanad Lake.     

Adsorption and photocatalytic degradation of bisphenol A using TiO2 and its separation by submerged hollowfiber ultrafiltration membrane

This study evaluates the adsorption ability ofbisphenol A（BPA） on titanium dioxide（TiO2） and its effect on the photocatalysis by advanced oxidation process using UV radiation and TiO2 photocatalyst. Degradation of BPA was also evaluated for the system without adsorption prior to photocatalytic reaction. The separation of TiO2 from BPA solution treated by pilot-scale photocatalytic reactor （capacity 0.16 m^3） was studied using submerged ultrafiltration （UF） membrane. It was found that although adsorption capacity of BPA was not high, adsorption played an important role in improving the efficiency ofphotocatalysis. On the other hand, during the separation of TiO2 particles from aqueous suspension, the permeate flux of the membrane was strongly affected by transmembrane pressure and TiO2 dose. The permeate turbidity was decreased below 1 NTU.     

工业生态学：一种新的清洁生产战略

提出了将工业生态学的原则在系统水平上应用到清洁生产计划中所使用的概念、战略和工具.为了使工业系统向可持续性发展,应该有系统地稳定废品和副产品的价格,把扩散的损失降至最小,使经济非物质化,并且由碳氢化合物之外的来源生产能源.作者在印度进行了许多研究,旨在检验并采用"工业的新陈代谢"方法论.     

Nanotechnology and groundwater remediation: A step forward in technology understanding

Nanotechnology application to contaminated site remediation, and especially the use of nanoscale zero‐valent iron particles to treat volatile organic compound (VOC)‐impacted groundwater, is now recognized as a promising solution for cost‐effective in situ treatment. Results obtained during numerous pilot tests undertaken by Golder Associates between 2003 and 2005 in North America (United States and Canada) and Europe have been used to present a synthetic cross‐comparison of technology dynamics. The importance of a comprehensive understanding of the site‐specific geological, hydrogeological, and geochemical conditions, the selection of appropriate nanoscale particles, the importance of monitoring geochemical parameters during technology application, and the potential of nanoparticle impact on microbial activity are discussed in this article. The variable technology dynamics obtained during six pilot tests (selected among numerous other tests) are then presented and discussed. © 2006 Wiley Periodicals, Inc.